Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
read section titled "Safety warnings" before maintaining tool.
1. with battery removed or cord disconnected, make daily inspection to ensure free movement of
nosepiece and trigger.
Do not use tool if nosepiece or trigger sticks or binds.
2. lubrication of the feed system is not necessary. Do Not oil.
3. wipe tool clean daily and inspect for wear, especially the bit and nosepiece. replace as necessary.
WARNING
repairs other than those described here should be performed only by trained,
qualified personnel. Contact SeNCo for information at 1-800-543-4596.
Accessories
SeNCo offers a full line of DuraSpin screws and accessories for your SeNCo tools, including:
•
bits
•
Storage bag
•
Assorted Nosepieces
•
Safety Glasses
For more information or a fully illustrated catalogue of Senco accessories, contact your sales
representative or call Senco at 1-800-543-4596.
technical Specifications
Table 4 - DS242-AC Tech Specs
VOLTAGE
CURRENT
RPM
WEIGHT
HEIGHT
LENGTH
WIDTH
FASTENER CAPACITY
FASTENER LENGTH
FASTER RANGE
All manuals and user guides at all-guides.com
tool oPerAtioN
120V
6 AMPS
0-2500 REV/MIN
5.65 LBS.
9.65"
16.35"
3.23"
50 SCREWS (1 STRIP)
1-2"
#6-#12
Table 6 - DS342-AC Tech Specs
VOLTAGE
CURRENT
RPM
WEIGHT
HEIGHT
LENGTH
WIDTH
FASTENER CAPACITY
FASTENER LENGTH
FASTER RANGE
Table 5 - DS245-AC Tech Specs
VOLTAGE
CURRENT
RPM
WEIGHT
HEIGHT
LENGTH
WIDTH
FASTENER CAPACITY
FASTENER LENGTH
FASTER RANGE
120V
6 AMPS
0-2500 REV/MIN
5.68 LBS.
9.65"
17.17"
3.23"
50 SCREWS (1 STRIP)
1-3"
#6-#12
15
10
120V
6 AMPS
0-5000 REV/MIN
5.54 LBS.
9.65"
16.34"
3.23"
50 SCREWS (1 STRIP)
1-2"
#6-#10
Publicidad
