Publicidad
Idiomas disponibles
Idiomas disponibles
When required, you can clean
the filter with warm water
without any additions. Reinsert
it only after it is completely dry.
Outlet filter (7)
The appliance is also equipped with an outlet filter. It is located
on the rear of the device under the parking aid.
We recommend that you clean the filter every 6 months to
assure correct functioning.
WARNING:
• Before cleaning remove the mains lead from the socket.
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or fire.
CAUTION:
•
Do not use a wire brush or any abrasive items.
•
Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Storage
•
Let the device cool down completely.
•
Wind the cable completely.
•
Please insert the hook of the floor nozzle into the parking
assistant on the rear of the device.
•
When you place the appliance vertically: Hang the hook of
the accessory holder (on the suction tube) into the parking
aid on the underside of the appliance.
Troubleshooting
•
The Device Does Not Work.
Remedy:
Check the connection to the mains.
Check the position of the switch.
•
The device does not suck up anything.
Possible Cause:
The dust collector is full.
Remedy:
Empty the dust collector.
or
Possible Cause:
The filters are dirty.
1. Push the lever to the left
and remove the ventilation
grid.
2. Remove the filter insert
and clean it as described
above.
3. Place the completely dry filter back into the ventilation grille.
4. Put the ventilation grille back on the appliance. Observe the
guide lugs. The ventilation grid must engage audibly.
Cleaning
Remedy:
Clean the components.
or
Possible Cause:
There is a foreign body in the suction tube or the nozzle.
Remedy:
Check the accessories for foreign bodies.
Noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 76 dB(A) (no limit)
Model: .............................................................................BS 1294
Power supply: ...........................................220-240 V ~, 50/60 Hz
Power consumption: ........................................................... 700 W
Protection class: ......................................................................... II
Net weight: ........................................................................4.70 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations
Technical Data
33
Publicidad
