LD Systems LDICOA12A Manual Del Usuario página 12

Max. SPL (Peak):
Protection circuits:
Control elements:
Display elements:
Mic/line inputs:
Mic/line input connections:
Line inputs:
Line input connections:
Line outputs:
Line output connections:
AD/DA converter sampling frequency:
AD/DA converter resolution:
Power supply:
Operating voltage:
Fuse:
Power consumption:
Ambient temperature (running):
Relative humidity:
Housing material:
Housing design:
Mounting:
Monitor angle:
Dimensions (W x H x D):
Weight:
Accessories included:
Additional features:
MANUFACTURER´S DECLARATIONS
MANUFACTURER'S WARRANTY & LIMITATIONS OF LIABILITY
You can find our current warranty conditions and limitations of liability at: https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARATIONS_
LD_SYSTEMS.pdf To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1,
61267 Neu Anspach / Email: Info@adamhall.com / +49 (0)6081 / 9419-0.
CORRECT DISPOSAL OF THIS PRODUCT
(valid in the European Union and other European countries with a differentiated waste collection system)
This symbol on the product, or on its documents indicates that the device may not be treated as household waste. This is to avoid environ-
mental damage or personal injury due to uncontrolled waste disposal. Please dispose of this product separately from other waste and have it
recycled to promote sustainable economic activity. Household users should contact either the retailer where they purchased this product, or their
local government office, for details on where and how they can recycle this item in an environmentally friendly manner. Business users should
contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial waste
for disposal.
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation
12
126 dB
Multi-band limiter, overheating, overvoltage, excess current
On/Off switch, rotary-push encoder, 2 x gain controller
XLR/6.3 mm jack combi sockets (balanced)
3.5 mm stereo socket
100–240 V AC 50–60 Hz
< 80% (non-condensing)
36 mm flange (0°, 5°), 6 x M10 flying points
375 x 635 x 396 mm
19.9 kg
4 handles, 6 x M10 rigging points, rubber feet for using the monitor, robust front grille,
DSP with user EQ and Delay function
128 dB
LC display
2
1
1
XLR
48 kHz
24 bit
SMPS
T4AL 250 V
150 W
0 - 40°C
Polypropylene
Bassreflex
55°
416 x 695 x 415 mm
24.3 kg
Power cable