Publicidad
Idiomas disponibles
Idiomas disponibles
• Ensure door seals and areas where door seals meet the unit are dry
before closing doors.
Replacing the LED light
• Caution: Unplug unit before replacing light. The LED light is easy to
replace, but should be replaced by a qualified and responsible per-
son. Do not allow children to maintenance freezer unit.
• Follow these steps to replace the LED light:
1. Ensure unit has no power. Unplug unit if plugged in.
2. Remove light cover by raising it up, and pulling it out.
3. Remove LED light while pressing the connector latch to release it.
4. Replace LED light, and ensure it is securely in place. It should
snap back into place.
5. Replace light cover.
6. Plug power back into unit.
12
Publicidad
