Product Information - Joie i-Gemm signature Manual De Instrucciones

WARNING
!
Frequently check the ISOFIX guides for dirt and clean them if neces-
sary. Reliability can be effected by ingress of dirt, dust, food particles
etc.
!
DO NOT place any objects in the load leg area in front of your base.
!
DO NOT use any load bearing contact points other than those de-
scribed in the instructions and marked on the infant child restraint.
!
Please do not use this car seat if the car seat has dropped from a
significant height, hit the ground at a considerable speed, or has
visible signs of damage. We are not responsible to replace if the car
seat has been damaged under these abnormal conditions. A new
car seat will need to be purchased when any of the aforementioned
conditions occurs.
Emergency
In case of emergency or accidents, it is most important to have your
child taken care of with first aid and medical treatment immediately.
Figure for
Installation
5
Suitable for
Child height 40cm-85cm/
Child weight≤13kg
(approximately 1.5 years
old or under)
Child weight≤13kg
Child age≤15 months

Product Information

" i-Size" (Integral Universal ISOFIX Child Restraint Systems) is a
category of Infant Child Restraint System for use in all i-Size seating
position of a vehicle.
Not all vehicle manufacture's handbooks list i-Size compatibility yet.
This seat and base is also approved for use in ISOFIX compatible
vehicles. Please refer to the vehicle manufacturer's website or consult
your dealer.
1. According to the ECE R129/00 Regulation, the infant carrier module
with Base is a Universal ISOFIX Class C, D infant child restraint and
should be fitted using the ISOFIX connections.
2. This is an "i-Size" infant child restraint System. It is approved to
Regulation ECE R129/00, for use in, "i-Size compatible" vehicle
seating positions as indicated by vehicle manufacturers in
the vehicle users' manual.
3. If in doubt, please consult the infant child restraint manufacturer or
the retailer.This is an i-Size ISOFIX CHILD RESTRAINT SYSTEM.
It is approved to ECE R129/00 series of amendments, not all vehicle
manufacture's handbooks list i-Size compatibility yet. This seat and
base is also approved for use in ISOFIX compatible vehicles. Please
refer to the vehicle manufacturer's website or consult your dealer.
It will fit vehicles with positions approved as i-Size ISOFIX positions (as
detailed in the vehicle handbook), depending on the category of the
infant child restraint and of the fixture.
6