Beko 01M-8897233200-0722-13 Manual Del Usuario página 15

5 Installation of appliance
5.6 Installation of Air Baffle (BHCA
64640 BH - BHCA 94640 BH - BHCA
94640 WH)
While using with the carbon filter, air baffle is pro-
vided with your appliance with the aim of re-re-
leasing the air which is cleaned with carbon fil-
ter from the perforated located on the chimney.
Assemble the air baffle as below.
(Figure 13)
There is a tab in the middle of the chimney con-
nection plate. Place the middle point of this tab on
the line that is drawn perpendicular to the wall.
Align horizontally and mark the holes where the
connection plate will be mounted via a pen (Figure
13/A, B).
Drill the marked points with Ø6mm drill and in-
sert two Ø6mm plastic dowels in the drilled holes
(Figure 13/A, B).
Fix the Chimney connection plate to the wall with
3.9x22 screws (Figure 13/A, B).
For the assembly air baffle, drill points C, D, E, F
with a Ø6mm drill bit and tap the Ø6mm plastic
dowels (Figure 13).
Assemble cooker hood's body (Figure 9).
Cooker Hood / User Manual
(Figure 14)
1. Air Baffle
2. Plastic Chimney
Attach the plastic Chimney adapter, which is in-
cluded in the package, in the direction of the air
baffle. Lock the Chimney adapter by turning it in
the direction of the arrow (Figure 14).
(Figure 15)
Assemble the air baffle group with 3.9 x 22
screws from point C, D, E, F that you have already
prepared (Figure 15).
1
2
15 / EN