Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
FAUCET INSTALLATION
- Remove the gasket (3), metal washer (4),
and retaining nut (5) from the faucet shank.
- Feed the faucet water lines (2) through the
faucet mounting hole .
- Secure the faucet to the sink with the
gasket (3), metal washer (4), and retaining
nut (5) from underneath.
- Tighten the retaining nut (5) by hand until it
is snug. Gently tighten the two screws (6) in
the retaining nut . Do not overtighten .
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance.
Gasket (3)
Retaining Nut (5)
Gasket (3)
Retaining Nut (5)
5
Water Lines (2)
Sink
Metal
Washer (4)
Fig . 2
Metal Washer (4)
Screws (6)
Fig . 3
CONGLOMKB.COM
Sink
Publicidad
