Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE THE WASHER
1. Power (
)
• Use this button to turn the Power On/Off.
2. Cycles
• Rotate the Cycle selector knob to select cycle
designed for different types of fabric and soil
levels.
• Each cycle has a preset Water Temperature, Spin
Speed, Soil Level, and Option (See page 13).
• The preset settings can be changed anytime
before Start.
NOTE: This front load washer requires longer cycle
time and gets clothes much cleaner, yet is
more gentle on the fabrics, than top load
washers. Washing time can be reduced
significantly for small loads or lightly soiled
loads by selecting Quick Cycle with the
Option button and setting the Soil Level
button at Light.
3. Start/Pause (
• Use this button to start/stop the washer.
1 4
)
4. Delay Wash
• Allows the start of any cycle to be delayed for
1~12 hours.
• Choose the wash cycle for your load, and then
press the Delay Wash button once for one hour or
press the button again to increase the delay wash
time up to 12 hours in one hour increments.
5. Custom Program
• Custom Program allows you to store a customized
wash cycle for future use.
• To make a Custom Program:
1. Select a cycle.
2. Select Wash/Rinse Temperature, Spin Speed,
and Soil Level.
3. Select other desired Options.
4. Press and hold Custom Program button 3
seconds (2 beep sounds).
The Custom program is now stored for future
use. To reuse the program, select Custom
Program and press Start/Pause (
).
Publicidad
