Bestron COPPER Serie Manual Del Usuario página 24

OPERATION - General
The grill is only intended for domestic use, not for professional use.
1.
9.
1. Handle
2. Grill plate with collecting groove
3. Thermostat dial
4. Indicator light, temperature
5. Removable thermostat
OPERATION - Before first use
1. Remove the grill from the packaging, and remove all packaging
materials.
2. Clean the grill plate before using the appliance for the first time
(see 'Cleaning and maintenance').
WARNING:
• The appliance may emit a little smoke and a characteristic
smell when you switch it on for the first time. This is normal
and will stop on its own. Make sure the appliance has sufficient
ventilation.
• Keep house birds away from the appliance when it is in use.
Fumes released from the non-stick coating are harmful to
birds.
OPERATION - Preheating
1. Put the appliance on a level and heat-resistant
surface.
2. Insert the thermostat completely into the connection
socket of the grill plate. Only the supplied cord with
thermostat may be used.
3. Put the plug in the wall socket.
4. Adjust the thermostat dial to the required
temperature (position 1 through 5). The indicator
light on the thermostat will illuminate to show that
the heating element has been switched on.
5. After waiting a few minutes check whether the
indicator light is extinguished.
6. Once the indicator light has extinguished the
appliance has reached the required temperature, and is ready for use. During use the heating element
will switch on and off to keep the temperature of the grill plate constant. Consequently the indicator light
will also occasionally be illuminated.
2. 1.
7.
8.
6. Connection socket
7. Housing
8. Heat protection and drip tray
9. Non-slip feet
10. Power cord with plug
24
6. 3. 4.
5.
9.
EN
10.