Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
Screw(s) will not
align into hole(s).
Doors are not
probably aligned.
LIFETIME HASSLE-FREE GUARANTEE
This product carries a lifetime warranty. If the product is found to be defective, please call
888-3KOBALT, 8 a.m. - 8 p.m., EST, Monday - Sunday, or return the item to the place of purchase
with a copy of the original sales receipt. The distributor will, at its option, repair or replace the product.
This warranty gives you specific legal rights, and you may have other rights that vary from state to
state.
POSSIBLE CAUSE
1. Natural properties of sheet
metal cause slight changes in
pre-drilled hole location.
1.Uneven floor.
CORRECTIVE ACTION
CORRECTIVE ACTION
1. Place screws into all aligned holes
and hand tighten. Push a 3/8 in.
hole-punch through both holes to force
the alignment. With the hole-punch in
place, tighten all other screws. When the
hole-punch is removed, the screw(s)
should easily fit into the remaining
hole(s).
1. Adjust the hex nut in leg leveler
assembly until the doors are aligned.
13
Publicidad
