Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
5. Screw leg leveler assemblies
(K) to base panel (E) until tight.
6. Align the holes on the door support
bracket (L) with the holes in the left side
panel (C) and right side panel (D). Using
ST 4.8 x 10 mm screws (AA) to tight the
door support bracket (L) to the unit. Place
the cabinet upright.
Note: Make sure the side with cut-outs
in door support bracket (L) face upward.
Hardware Used
AA
ST4.8 x 10 mm
Screw
5
K
6
L
x 8
8
AA
D
E
E
K
C
Publicidad
