IKEA LAGAN Manual Del Usuario página 7

ENGLISH
Energy savings tips
Washing dishes in the dishwasher as
instructed in the user manual usually
consumes less water and energy than
washing dishes by hand. Load the
dishwasher to its full capacity to save water
and energy. For best cleaning results,
arrange items in the baskets as instructed in
the user manual and do not overload the
baskets.
Do not pre-rinse dishes by hand. It increases
the water and energy consumption. When
needed, select a programme with a prewash
phase. Remove larger residues of food from
Service and spare parts
To repair the appliance contact the
Authorised Service Centre. Use original
spare parts only. Please note that self-repair
or non-professional repair can have safety
consequences and might void the
guarantee.
The following spare parts will be available
for 7 years after the model has been
discontinued: motor, circulation and drain
pump, heaters and heating elements,
including heat pumps, piping and related
equipment including hoses, valves, filters
and aquastops, structural and interior parts
related to door assemblies, printed circuit
Care and cleaning
Warning! Before any
maintenance other than running
the programme Machine Care,
deactivate the appliance and
disconnect the mains plug from
the main socket.
Dirty filters and clogged spray
arms negatively affect the
washing results. Check these
elements regularly and, if
necessary, clean them.
To download the full version visit www.ikea.com
the dishes and empty cups and glasses
before putting them inside the appliance.
Soak or slightly scour cookware with firmly
cooked-on or baked-on food before washing
it in the appliance.
Make sure that items in the baskets do not
touch or cover each other. Only then can the
water completely reach and wash the dishes.
Select a programme according to the type of
load and the degree of soil. ECO offers the
most efficient use of water and energy
consumption.
boards, electronic displays, pressure
switches, thermostats and sensors, software
and firmware including reset software.
Please note that some of these spare parts
are only available to professional repairers,
and that not all spare parts are relevant for
all models.
The following spare parts will be available
for 10 years after the model has been
discontinued: door hinge and seals, other
seals, spray arms, drain filters, interior racks
and plastic peripherals such as baskets and
lids.
Machine Care
Machine Care is a programme designed to
clean the appliance interior with optimal
results. It removes limescale and grease
buildup.
When the appliance senses the need for
cleaning, the indicator
Machine Care programme to clean the
appliance interior.
7
is on. Start the