Publicidad
Idiomas disponibles
Idiomas disponibles
EN INSTRUCTIONS ON ASSEMBLY AND USE
CONGRATULATIONS ON
PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an
integral component of the product. Therefore, please store them
and the packaging carefully in case questions arise in the future.
Please always include these instructions when handing on the
product to a third party. This product must be assembled by an
adult. This product is designed for private / domestic use only.
This product is not designed for commercial / industrial use. The
use of the product requires specific skills and knowledge to be
able to avoid injuries due to crashes and collisions. Always adjust
according to the age of the user and use for the purpose it has
been designed for.
TECHNICAL SPECIFICATIONS
Item:
HUDORA BigWheel
Item number:
14235, 14236
Dimensions:
approx. 100 cm in length, deck.
approx. 35 x 14 cm
Product weight:
approx. 5.2 kg
Class:
A, 120 kg maximum user weight
Maximum height: 1065 mm
Purpose:
Leisure scooter for use on public areas, no toy.
If you have assembly problems or would like further information on
the product, we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x scooter | 1 x these instructions
Other parts which may be included with the delivery in some cir-
cumstances are not required.
SAFETY INSTRUCTIONS
• For your own safety, make sure you wear suitable protective
clothing. Wear personal protective equipment! This includes at
least: hand / wrist protection, knee protection, head protection
and elbow protection. Never use the scooter without sturdy
shoes.
• The scooter is only intended for use by one person.
• Only use the scooter on surfaces that are suitable for it, i.e.
those which are flat, clean, dry, and use the scooter where
possible away from other road users. Avoid sloping ground.
The brake may become hot if the scooter has been used for a
while! Your footwear could be damaged! The brake shouldn't
be touched until it has cooled down.
• Always be considerate of others.
• Before you begin – Ensure that all fasteners and locking parts
are intact and tight, e.g. the folding mechanism and the height
setting of the handlebar. The functions of self-securing screw
threads can be impaired after repeated loosening and tighten-
ing of the connecting elements. Check especially for the correct
alignment and fastening of the steering set-up.
• Make sure that the stand is folded safely while driving.
• Do not use the scooter at twilight, at night or in poor visibility.
Do not use it on roads or thoroughfares or on slopes or hills.
Avoid being in the proximity of stairs and open water.
• The scooter is not suitable for jumps.
• Prior to using the scooter, please inform yourself about re-
stricting applicable traffic regulations for the intended area of
application.
Style 230
®
• The use of the product requires specific skills and knowledge to
be able to avoid injuries due to crashes and collisions.
• Children should only use the product when they are under adult
supervision.
• Ensure when riding that the logo on the handlebar points to the
front or else that the push buttons is as such oriented backwards.
INSTRUCTIONS ON ASSEMBLY
No tools are required to assemble the product. The scooter is deli-
vered in its transport form (folded)! (Picture 1)
PLEASE PROCEED AS FOLLOWS TO GET THE SCOOTER
READY FOR USE
• Pull the lever that is in the direction of movement, located to the
right of the folding mechanism, in order to release the trans-
portation lock. (Picture 2)
• Unfold the scooter's handlebars upwards.
• Now push the folding hinge towards the handlebar stem until
you hear it click into place. (Picture 3)
• Loosen the quick release fastener on the T-piece of the handle-
bar shaft by pushing the lever away from the T-piece. (Picture
4). Insert the handlebar grips in the T-piece of the handlebar
grip. Use your thumbs to press down both locking buttons until
the the grips can be easily pushed into the T-section. Turn the
handlebar grips until the locking buttons are positioned in the
two openings intended for them and you hear them click into
place. Check that both handlebar grips are fitted correctly by
pulling both outwards. Do not let the two hand grips move out
of their locking mechanism, once they are fitted properly. Now
close the quick release fastener on the T-piece of the handlebar
shaft, by inserting the lever into the T-piece. In case the grips
are not firmly fitted enough, open the quick release fastener
again and turn the screw on the opposite side deeper into the
thread, so that the fastening clamp tightly sits on the T-piece.
• Loosen the quick release lock on the handlebar rod by pushing
the lever of the quick release lock until the lever is parallel to the
handlebar grip. (Picture 5)
• The handlebars can be locked into place at 4 different heights.
Pull the handlebar rod out of the handlebar stem until it is at the
required height and the relevant button has snapped into place.
(Picture 6) The maximum height cannot be exceeded due to the
integrated lock.
• Now close the quick release lock by pushing the lever down to
the handlebar stem. (Picture 5)
• In the event that the handlebar does not sit tight enough at the
selected height, open the quick release fastener again and turn
the screw on the opposite side deeper into the thread, so that
the fastening clamp tightly sits on the handlebar. Repeat this
process until the handlebar can be securely adjusted.
• Before using, always check that all parts are firmly fixed, parti-
cularly the folding mechanism, steering lock and the wheels.
TO GET THE SCOOTER READY FOR TRANSPORT AGAIN,
PLEASE CARRY OUT THE FOLLOWING ACTIONS
• Loosen the quick release lock by pushing the lever of the quick
release lock away from the handlebar stem. (Picture 5)
• Please press the locking button so that the handlebar rod can
be moved. (Picture 6)
• Push the handlebar rod as far as it will go into the handlebar
stem.
5/20
Publicidad
