Publicidad
Idiomas disponibles
Idiomas disponibles
EN INSTRUCTIONS ON ASSEMBLY AND USE
• Close the quick release lock by pushing the lever down to the
handlebar stem. (Picture 5)
• Loosen the quick release fastener on the T-piece of the handle-
bar shaft by pushing the lever away from the T-piece.
• Use your thumbs to press both locking buttons in the handlebar
grips and pull the handlebar grips outwards until they are re-
leased completely from the T-section. (Picture 4)
• Press the handlebar grips far down until they are parallel to
the handlebar shaft and can be pressed it into the appropriate
supports.
• Now close the quick release fastener on the T-piece of the hand-
lebar shaft, by placing the lever around the T-piece.
• Pull the lever that is in the direction of movement, located to the
right of the folding mechanism, in order to release the assem-
bly lock. (Picture 2)
• Fold up the scooter by moving the handlebar rod towards the
back wheel until you hear the transport lock click into place.
(Picture 1)
USAGE INSTRUCTIONS
NOTHING'S EASY AT FIRST ...
... most accidents happen to "beginners" within the first ten
minutes. Particular care should be taken during this stage.
DRIVING INSTRUCTIONS
The scooter moves when a foot is used to regularly push off, just as
with wellknown children's scooters. Braking is no problem either –
simply step on the friction brake over the back wheel (mudguard).
We recommend folding the scooter by hand after each ride or
using the double stand located under the running board. Its use is
ensured through simply folding and unfolding.
Aluminium is a good and light material but should also be handled
carefully as it is not as hard as steel, for example.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special
cleaning agents! Check the product for damage or traces of wear
and tear before and after each use. Do not make any structural
changes. For your own safety, please use original spare parts only.
These can be sourced from HUDORA. If parts become damaged
or if sharp edges or corners should develop, the product may not
be used any more. If in any doubt, please contact our service team
(http://www.hudora.de/). Store the product in a safe place where
it is protected from the elements, cannot be damaged, and cannot
injure anyone.
Replace damaged or worn assembly parts in order to ensure the
safety of your scooter.
WHEEL CHANGE
Replacement wheels are available as accessories from http://
www.hudora.de/ and should be replaced when they are worn
down. To change the wheels, loosen the axle fitting with two Allen
keys and take the wheels off the axle. A screwdriver or Allen key
can be used to push the bearings out of the wheel to use them
in the new wheel. However, it is usually advisable to change the
bearings when the wheels are changed. Put the bearings into the
new wheel with the bolt spacer and mount them to the frame with
the axle screws. Make sure the axle has been screwed on tightly
before starting again!
BEARINGS
Your kick scooter is equipped with precision ball bearings, which
were filled with grease under high pressure, during manufacture.
For this reason, the rollers of the kick scooter only run lightly and
swiftly, while under load. Bearings are maintenance-free, but they
are wear parts. Caution! Worn bearings make conspicuous audi-
ble noises and their function is cons- trained. In order to maintain
optimal riding pleasure and to ensure lasting safety, you should
replace bearings, as soon as they begin to exhibit signs of being
worn. In the case of full load and daily use we recommend the
replacement of the rollers and bearings twice a year. Bearings are
available as accessories under http://www.hudora.de/.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appro-
priate collection point provided in your area. Local waste manage-
ment companies will be able to answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise
however, we put just as much effort into rectifying them. Therefore,
you can find numerous information on the product, replacement
parts, solutions to problems and lost assembly manuals at http://
www.hudora.de/.
SPARE PARTS AND ORIGINAL
ACCESSORIES AVAILABLE AT:
http://www.hudora.de/
All images are examples of the design.
6/20
Publicidad
