Burley Bee Instrucciones Del Propietario página 10

Installing the Tow Bar
A B
1
While depressing the button, slide
the tow bar into the tow bar receivers
until hole A with hole B. the red
safety strap bracket should be flush
with the front of the reciever.
Removing the Tow Bar
1
remove the retaining pin,
and unclip the safety strap.
2
While depressing button,
remove the tow bar.
10
ASSEMBLY & uSE
2
Insert the retaining pin from the
top through the aligned holes.
Securing the Cover
1
Attach cover to trailer by using the
snaps at the top of the trailer.
ENG
3
Ensure that the retaining pin is
locked properly as shown above
2
Attach the velcro at the rear and slip
the cover d-rings over the hooks at
the front corners of the trailer.
DEU FRA ESP
4
clip the receiver safety strap to the
d-ring on the trailer frame.
BURLEY.COM