Publicidad
Idiomas disponibles
Idiomas disponibles
-
In case of product malfunction, discontinue use and immediately contact the authorized technical assistance service.
OPERATION
BEFORE FIRST USE
1. Remove all packing materials, including any adhesive tape.
2. Thoroughly clean the bowl and basket with hot water, dish soap and a non-abrasive sponge.
3. Clean the inside and outside of the product with a damp cloth.
This appliance is heated with hot air. Never pour oil or fat into the basket.
PREPARATION FOR USE
1. Place the product on a stable, flat and heat-resistant surface.
2. Correctly position the bowl in its compartment. Never pour oil or other liquids into the fryer.
3. Do not place objects on top of the product, as this will block the air flow and affect the heating effect of the hot air.
N.B. If the bowl is not correctly inserted into the cooking chamber, the appliance will not start.
Do not insist on opening the drawer without first unlocking it with the special mechanism, especially
if the appliance is hot. Risk of damage to the opening mechanism.
PRODUCT OPERATION
1. Power on
Connect the appliance plug to the power socket, you will hear a BEEP sound. The display will light up for 1 second and return to
standby mode: all lights go out except the indicator light.
2. Temperature / Time Menu Selection
Press the power button
respectively 180 ° C and 15 min.
At this point it is possible to adjust the time and temperature freely using the Time +/- and Temperature +/- adjustment
buttons.
You can also press any of the pre-set programs to cook different foods.
By pressing any of the pre-set cooking buttons, the lights will flash, then press the start button
start cooking. Each program has its own time and temperature set by default (as shown in the table). The user can adjust the
time and temperature freely using the Time +/- and Temperature +/- buttons.
a) The temperature adjustment range is between 50 and 200 ° C. By pressing the Temperature +/- button it is possible to
increase or decrease by 10 ° C. When you reach 200 ° C, by pressing the "+" key once, the temperature will return to 50
° C, by pressing the "-" key again it will return to 200 ° C. During the temperature adjustment process, the temperature
will flash on the display (it does not flash during operation), and, after 3 flashes, the selected temperature is confirmed.
b) The time setting is between 1 and 60 minutes. By pressing the Time +/- button it is possible to increase or decrease by 1
minute. When you reach 60 minutes, by pressing the "+" button once, the time will return to 1 minute, by pressing the
"-" button again it will return to 60 minutes. During the time adjustment process, the time will flash on the display (it
does not flash during operation), and after 3 flashes the selected time is confirmed.
3. Start, pause / stop
After selecting the desired program, time and temperature, press the button
The icon
will start flashing, a BEEP will be heard and the appliance will start to work.
If during operation you wish to stop cooking, press the button
and the display will show the temperature and the time of the pre-set program, which are
to start cooking.
: you will hear a BEEP, the appliance will stop working and the
15
and the appliance will
Publicidad
