Publicidad
Idiomas disponibles
Idiomas disponibles
When servicing the Digital multimeter, use only the same model
number or identical electrical specifications replacement parts.
The internal circuit of the Digital multimeter shall not be altered at will
to avoid damaging it or having an accident.
Soft cloth and mild detergent should be used to clean the surface of the
Digital multimeter when servicing. No abrasive and solvent should be
used to prevent the surface of the Digital multimeter from corrosion,
damage and accident.
The Digital multimeter is suitable for indoor use.
Turn the Digital multimeter power off and take out the battery when
not in use for a long time. Constantly check the battery as it may leak
when it has been used for some time, replace the battery as soon as
leaking appears. A leaking battery will damage the Digital multimeter.
1. GENERAL CHARACTERISTICS
Maximum Display:
Polarity:
Measuring Method:
LCD:
Sampling Speed:
Overcharge Indicator:
Operation Environment:
Storage Environment:
Low Battery Indicator:
Characteristics 3 V
batteries DC:
Static Electricity:
Product Dimensions:
Product Ney Weight:
LCD, 3-1/2 digits (counts up to 1 999)
15 mm (0,6")
Minus displays automatically and plus
superimposes
Integral dual switch
45 mm x 23 mm
2 times per second
Displays "I"
0 ºC – 104 ºF, at < 80% HR
14 ºF – 122 ºF, at < 85% HR
It displays "
"
Uses 2 Carbon–Zinc, Type AAA,
1,5 V DC included
Around 4 mA
160 mm x 76 mm x 32 mm
155 g (includes battery)
Publicidad
