Publicidad
Idiomas disponibles
Idiomas disponibles
Overload Protection: 500 mA / 250 V fuse (range without fuse, 10 A).
Voltage drop measurement: 200 mV
RESISTANCE
Range
200
2 k
20 k
200 k
2 M
Open Circuit Maximum Voltage: 3 V
Overload Protection: 15 seconds maximum 220 V RMS
TEMPERATURE (WITH THERMOCOUPLE TYPE K)
Range
-40 ºC - 150 ºC
150 ºC - 1 370 ºC
-40 ºF - 320 ºF
320 ºF - 1 999 ºF
4. OPERATION INSTRUCTIONS
MEASURING VOLTAGE DC AND AC
1.
Connect the red test probe to the "V mA" connector; the black test
probe to the "COM" connector.
2.
Set the RANGE switch into the desired VOLTAGE range. If the voltage
to be measured is unknown beforehand, set the switch in the higher range
and reduce until getting a satisfactory reading.
3.
Connect the test probes to the device or circuit to be measured.
4.
Turn on the power of the device or circuit to be measured. Voltage
value will shoe in the digital screen together with the voltage polarity.
Resolution
0,1
1
10
100
1 k
Resolution
1 ºC
1 ºF
Accuracy
(1.0 % of rdg + 10 dgts)
(1.0 % of rdg + 4 dgts)
Accuracy
(1,0% + 4 dgts)
(1,5% + 15 dgts)
(1,0% + 4 dgts)
(1,5% + 15 dgts)
Publicidad
