Pando PFBI FRIGO 178x54 Manual De Uso página 92

INOXPAN S.L.
• When you first push this button, the last
value will appear on the cooler setting
indicator (#1).
• Whenever you press this button (#2
on control panel diagram), a lower
temperature will be set. (+8 °C, +6 °C,
+5 °C, +4 °C, +2 °C, and super cool)
• When you push the cooler set button until
the super cool symbol (#5) appears, and
if you do not push any button within 1
second, super cool will flash.
• If you continue to press the button (#2 on
control panel diagram), it will restart from
+8 °C.
• The temperature value selected before
super cool mode or economy mode
is activated and will remain the same
when the mode is over or cancelled. The
appliance continues to operate with this
temperature value.
Recommended Temperature Values for
Cooler
When to adjust
For cooling the fridge at
minimum capacity
In normal usage
For cooling the fridge at
maximum capacity
Note:Some built-in appliances may have a
stand-by mode.
3.2.5 Stand-By Mode
Purpose
This mode can be used to save energy
when you go on vacation.
How Would It Be Used?
*Select "8" set value.
*Push mode and cooler Set Button for 5
seconds.
*Display will show "St" "bY" on the screen.
During This Mode:
In stand-by mode; all components will be
disabled.
If you push the display button, display
will show "St" "bY" on the screen to show
stand-by mode is active.
To cancel; push mode and cooler set
button for 5 seconds.
After the mode is deactivated, an error
code may light on the display because the
product maybe not cool enough. The error
code will turn off when the product reaches
normal temperature.
During this mode the cooling components
will not operate. Only the LED and the
display will remain on.
3.2.6 Door Open Alarm Function
If fridge door is opened more than 2
minutes, appliance sounds 'beep beep'.
3.3 Temperature Settings Warnings
• Your appliance is designed to operate in
Inner
Temperature ( C)
o
8
4, 5, 6
• Temperature adjustments should be
2
• When the appliance is first switched on,
• A 5 minute delay function is applied
90
the ambient temperature ranges stated
in the standards, according to the climate
class stated in the information label. It
is not recommended that your fridge is
operated in the environments which are
outside of the stated temperature ranges.
This will reduce the cooling efficiency of
the appliance.
made according to the frequency of
door openings, the quantity of food kept
inside the appliance and the ambient
temperature in the location of your
appliance.
allow it to run for 24 hours in order to
reach operating temperature. During this
time, do not open the door and do not
keep a large quantity of food inside.
to prevent damage to the compressor
of your appliance when connecting
or disconnecting to mains, or when
an energy breakdown occurs. Your
appliance will begin to operate normally
after 5 minutes.
FRIDGE