VMI CUBE Manual página 64

1.
Sensor installation recommendations:
At least 1 metre above the ground if the sensor is placed on furniture or a shelf
•
At least 1.5 metres above the ground if the sensor is wall-mounted (attached with screws
•
and anchors)
To obtain data as close as possible to the user, we advise sticking to the recommended
locations.
2.
Do not install the indoor air quality sensor:
• Less than 30 cm from the ceiling
Outside
•
In an area where the temperature is below 0°C or above 50°C
•
• In an area where the humidity is greater than 95%
In a dusty or dirty area (garage, workshop, etc.)
•
Less than 1 m from any doors and windows, or any heating, cooling or air vents
•
In a walkway where it could get damaged
•
In a confined space (for example, in a cupboard or behind a curtain)
•
In an area where it could be obstructed (for example by furniture)
•
3.
Do not install the sensor in any of the locations described in the "Locations to avoid"
•
paragraph.
Do not paint or cover the sensor.
•
Do not block the sensor openings.
•
Do not disassemble, modify or damage the sensor.
•
Preferred locations within a domestic or office environment
Locations to avoid
Precautions and operating limits of the sensor
64