Publicidad
Idiomas disponibles
Idiomas disponibles
FEATURES
FRONT
1
2
10
3
9
4
8
5
7
FRONT
1. Non-Slip Grip
2. Handle Fastener
3. Extra Belt Storage
4. Hepa Filter
5. Headlight
6. Edge Cleaning Bristles
7. Scuff Guard™ Bumper
8. Height Adjustment Knob
9. Full Bag Indicator
10. Carry Handle
BACK
24
23
22
21
20
19
6
BACK
16. Hose Caddy
11. Crevice Tool (in extension wand)
12. Cord Guide
13. Extension Wand
14. Stretch Hose
15. Quick Cord Release
16. Upholstery Tool
17. Dust Brush
18. Power Cord
19. Handle Release Pedal
20. Power Pedal
21. Hose Wand
22. Bag Compartment
23. Bag Release Lever
24. Bag Compartment Handle
5
TOOL REQUIRED: PHILLIPS SCREWDRIVER
LIST OF PARTS NEEDED:
1 handle screw
11
12
1.
13
14
15
16
Gently push midsection
onto base. The midsection
guides go into the nozzle
17
slots.
18
5.
Place the bag compartment
onto the back of cleaner.
Insert tabs at bottom into
grooves (located on back
bottom of body). Gently snap
panel into place.
HOW TO ASSEMBLE
4 body screws
2.
3.
1
2
4
3
Insert the four (4) screws
Push upper handle onto
into the hole openings.
upright, aligning upper
Three screw holes are
handle
with
handle
located inside bag chamber.
opening.
The fourth screw hole is
located underneath bag
chamber opening (4).
Secure by tightening the
screws with a Phillips
screwdriver.
6.
Place the upholstery tool
and the dusting brush into
their locations.
6
1 fastener
4.
Insert the ONE screw into
hole located on the back
of handle. Insert plastic
fastener into front of handle.
Hold the fastener in place
when tightening.
7.
Snap the extension wand (with
crevice tool located inside) onto
the back of upper handle.
Publicidad
