Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO OPERATE
QUICK CORD RELEASE
1.
• Turn Quick Cord Release for easy cord
removal.
• Plug cord into electrical outlet.
• Store cord in cord guide (see Features -
pg. 4) to keep out of way while in use.
CARPET SETTINGS
4.
Height
Handle should be in the
Adjustment
upright
position
Knob
adjusting the carpet setting.
Turn height adjustment
knob to match the surface
being cleaned. Once height
is selected, the nozzle will
go to the correct position
when the handle is lowered.
NOTE: Rotating brush could
cause area rug fringe to become tangled within cleaner.
Use caution when vacuuming throw rugs with fringe.
ABOVE FLOOR CLEANING
CAUTION: BRUSH AGITATOR CONTINUES TO ROTATE WHILE HOSE IS REMOVED OR IN USE AT ALL TIMES WHILE
CLEANER IS ON. KEEP HAIR, LOOSE CLOTHING, FINGERS AND ALL BODY PARTS AWAY FROM BRUSH
AREA WHILE CLEANER IS ON.
1.
2.
Cleaner must be in the upright
Remove crevice tool
position to lift the rotating
and extension wand
brush off the carpet when
for above-the-floor
cleaning above the floor. Put
cleaning.
cleaner in its upright position.
Suction
is
automatically
diverted to hose when unit is
in upright position. Remove
hose from the side of the
cleaner using the handle.
ON/OFF RELEASE
HANDLE RELEASE
2.
3.
ON/OFF
Switch
Turn
cleaner
"on"
by
Release handle by depress-
depressing power pedal (on
ing handle release pedal.
the back of the cleaner).
TRANSPORTING CLEANER
5.
Use the convenient front
carry handle when lifting
before
vacuum to transport.
Carry Handle
3.
4.
Remove crevice tool from
Remove dust brush or
upholstery
wand and fit on end of
attach to hose or wand end
wand
for
additional
to clean various surfaces.
reach. NOTE: DO NOT
use crevice tool while in
extension wand.
7
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
NOTE: You can tell your bag needs replacing when you experience less suction or when the Full Bag Indicator
changes to yellow. Do not exceed marked fill line on paper bag. Different types of dirt may require bag
replacement more often.
BAG TYPE
For Bag Type U replacements, please call 1-800-321-1134 or visit our website at
U
www.royalvacuums.com to locate a dealer nearest you.
1.
Full Bag
Indicator
When the full bag
indicator window
changes to yellow,
check the paper
bag. It may be time
for a new paper
bag.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
HEPA filter, part # 3-690320-001, is located on the side of cleaner.
NOTE: Unplug cleaner before changing filter.
NOTE: For best performance, replace filter yearly.
1.
brush
and
Loosen screw:
screw at the top of filter cover.
NOTE: To prevent misplacing
screw, do not take screw
completely out of filter cover.
PAPER BAG: REMOVAL & REPLACEMENT
2.
3.
Pull release lever and
Over trash receptacle,
lift to remove bag
press lever on bag
compartment.
holder to release full
paper bag.
HEPA FILTER: REMOVAL & REPLACEMENT
2.
the one (1)
Gently lower filter cover from
body.
8
5.
4.
Slide collar of new
Replace
bag
paper bag into bag
c o m p a r t m e n t .
holder. Hole in bag
NOTE: Cover MUST
should face out.
be securely fastened
I M P O R T A N T :
before operating.
INSERT
FINGER
INTO HOLE AND
PUSH PAPER AWAY
FROM
OPENING
B E F O R E
INSTALLING. NOTE:
Be sure lever on bag
holder secures bag
collar into place.
3.
Grasp HEPA filter cartridge
and remove. IMPORTANT:
DO NOT CLEAN WITH WATER.
For HEPA filter replacements
call 1-800-321-1134 (USA &
Canada).
Publicidad
