Sleep Timer; Wake Up Timer - Teac DR-H338i Manual Del Usuario

Sleep Timer

The power can be switched off after a specified amount of time.
Press the SLEEP button repeatedly until desired time appears on
the display.
SLEEP-10, 20, 30, 60 or 90
The power will be switched off 90 (60, 30, 20, or 10) minutes later.
SLEEP OFF
The sleep timer is off.
< If you want to check the remaining time, press the SLEEP button
once. The remaining time will be displayed for 3 seconds, and then
return to the normal display.

Wake Up Timer (1)

The unit can be programmed to turn on at a specified time.
< Adjust the clock before setting the timer (page 19).
1
If the unit is on, press the STANDBY/ON button to turn it
off (standby).
2
Press the CLOCK button.
3
Press the TIMER button.
"Timer Set" appears on the display, and the "hour" value starts
blinking.
< When no button is pressed for 30 seconds, the timer setting
mode will be cancelled.
4
Press the Volume buttons to set the start time (hour), and
then press the TIMER button.
The "minutes" value starts blinking.
Continue to the next page
47