Rapid EG Point Serie Manual De Instrucciones página 4

ELECTRIC HOT MELT APPLICATOR
Operating instructions - Original
SAFETY INSTRUCTIONS
Read carefully before using the
glue gun.
• HOT SURFACES (the glue
and the nozzle of the gun can
reach temperatures ranging from
150 to 200°C (depending on
the model used) Avoid all skin
contact. If burnt, plunge the
burn under cold water. Children
should only use the gun in the
presence of an adult.
• DO NOT use the gun in damp
or wet conditions or expose it to
rain.
• UNPLUG the gun from the wall
socket when not in use.
• NEVER put any object in the
gun other than the glue sticks
recommended.
• NEVER take a glue stick out
once it has been put into the
gun: the resulting damage may
be irreparable.
• NEVER pull the cord to unplug
the glue gun.
• THIS appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory and mental
capabilities or lack of experience
and knowledge if they have been
ELEKTRISCHE KLEBEPISTOLE
Betriebsanleitung - Übersetzung der ursprünglichen
SICHERHEITSHINWEISE
Aufmerksam vor Benutzung des
Apparats lessen
4
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
RECOMMENDATIONS
-REPAIRS
• If the power supply cable is
damaged it must be replaced
by the manufacturer, the
manufacturer's after sales
service or a similarly qualifi ed
person in order to avoid any
danger.
• Should you wish to dispose of
the tool always used recognized
and dedicated recycling station
or green collection point.
MAINTENANCE
• UNPLUG the tool before any
maintenance
• CLEAN the tool by a dry or
damp cloth. NEVER use any
solvent.
• DO NOT oil or grease any parts.
• BE sure the tool is not
damaged. Replace or repair
prior to use.
• HEISSE OBERFLACHEN (die
Düse des Apparats und der
Klebstoff konnen Temperaturen