Lpf - Amprobe ACD-50NAV Manual De Uso

Individual Harmonic Measurement (AC mode only)
Select the " " indicator then press the navigator key to enter the
individual harmonic mode. To quit from the individual harmonic mode,
press the navigator key for more than 2 seconds.
Hn=RMS of Individual Harmonic ÷ RMS of fundamental ×100%.
"UPWARD"
"DOWNWARD"
LPF (AC mode only)
Select the "LPF" indicator then press the navigator key to eliminate high
frequency noise
Note : Peak Hold, Inrush, THD, HZ, individual Harmonic and LPF mode are
only available in AC mode.
" "
" "
"RIGHTWARD"
"LEFTWARD"
"RIGHTWARD"
"LEFTWARD"

"LPF"

ENTER
ENTER
>2SEC
"UPWARD"
"DOWNWARD"
11