Introduction; How Ipl (Intense Pulsed Light) Technology Works; Long-Term Hair Reduction - Beurer IPL 7500 Manual De Instrucciones

Type BF applied part
Device in protection class 2
Device protected against foreign objects ≥
12.5 mm and against falling drops of water
Permissible storage temperature and hu-
Storage
158°F
90%
(70°C)
midity
14°F
0%
(-10°C)
Permissible operating temperature and
Operating
104°F
70%
(40°C)
humidity
50°F
30%
(10°C)
Keep away from eyes
Do not use the IPL 7500 device on tanned
skin or after sun exposure
Please dispose of the device in accord-
ance with EC Directive – WEEE (Waste
Electrical and Electronic Equipment).
Keep dry / Protect from moisture / Keep
away from showers, basins or other ves-
sels containing water.
Use device only with its original power
supply. For your safety, never use DC
adapters which are not approved by the
manufacturer

3. Introduction

The device is an over-the-counter device designed to re-
move unwanted hair and permanently reduce regrowth as
measured at 6, 9, and 12 months after treatment ends.
How IPL (intense pulsed light) technology
works
The device is based on the principle of selective photo-
thermolysis. IPL uses a combination of Intense Pulsed Light
(IPL) technology and unique skin condition sensors. The
light pulse is absorbed by the melanin in the hair shaft,
causing local thermal damage which results in a reduc-
tion in hair growth.

Long-term hair reduction

The hair growth cycle consists of three phases: anagen,
catagen, and telogen. Anagen is the growth phase, while
6