Urmet sinthesi S2 1083/74 Manual Del Usuario página 27

Example:
• System with 3 columns, the fi rst with 4
users, the second with 6 users and the
third with 8 users.
• Access advanced confi guration.
• Set the ID dip-switch to 0.
• Press the upper button of the door unit
(fi rst button).
• Set the ID dip-switch to 1.
• Press third button of the fi rst button
module (fi fth button) to associate user 0
of column 1 in this manner.
• Set the ID dip-switch to 2.
• Press fi rst button of the third button
module (eleventh button) to associate
user 0 of column 2 in this manner.
• Reset the ID dip-switch in start position.
• Quit advanced confi guration mode.
DS1083-056B
All manuals and user guides at all-guidesbox.com
The fi nal confi guration will be:
Column
0 start
The confi guration of column 0 is not required
if the default settings of the door unit are
maintained because all buttons are assigned to
this column.
Repeat the operation on all the main door units.
Column
1 start
4 USERS 6 USERS
P5÷P8
1083/17 (1)
P1÷P4
OUTPUT
Column
2 start
8 USERS
P9÷P12
P13÷P16
27