Wash Cycles - Indesit DSR 15B1 Manual De Instrucciones

Wash cycles

Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.
Based on the different conditions of use, the wash-cycle duration and data can change.
The number and type of wash cycles and options may vary depending on the dishwasher model.
Wash cycle
1. Eco
2. Intensive
3. Normal
4. Rapid 40'
5. Prewash
Instructions on wash-cycle selection and detergent dosage
1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal
soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery.
4 gr/ml**+ 21 gr/ml – 1 Tab (**Quantity of pre-washing detergent)
2. Heavily soiled dishes and pans (not to be used for delicate items). 25 gr/ml – 1 Tab
3. Normally soiled pans and dishes. 4 gr/ml**+ 21 gr/ml – 1 Tab
4. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 21 gr/ml – 1 Tab
5. Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W.
Notes:
Optimum performance levels when using the "Rapid 40'" cycle can be achieved by respecting the specified number of place
settings.
To reduce consumption, only run the dishwasher when it is full.
Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address:
contact@whirlpool.com
Wash cycle
which
Options
include
drying
Yes No
Yes No
Yes No
No No
No No
Approximate
Water
duration of wash
consumption
cycles
(l/cycle)
h:min.
02:10' 10
02:30' 14
02:00' 13,5
00:40' 9
00:10' 4
EN
Energy
consumption
(kWh/cycle)
0,83
1,3
1,15
0,85
0,01
31