1200 Series/4-bay IP Video Storage System
6.
7.
8.
3.3.2
Physical Connection
The system comes with a VGA graphic connector and with PS2 connectors for mouse and
keyboard.
1.
Bosch Sicherheitssysteme GmbH
Click Properties, select Internet Protocol Version 4 (TCP/IPv4), then click Properties.
This dialog box allows you to set the IP address configuration according to the
requirements of your network.
Reboot the system.
Connect a monitor, mouse and keyboard (not part of the shipment) to the disk array and
start up the system.
Note:
When connecting a PS2 mouse or keyboard device after the system has been booted it
will most likely not operate properly.
Quick Installation Guide
System Setup – First Steps | en
- | V1 | 2011.03
23