stayer TM851BA Manual De Instrucciones página 20

= Maximum drilling, steel
= Maximum drilling, stone
= Maximum drilling, wood
= Weight
L = Sound power level
WA
L = Sound pressure level
PA
= Vibration
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specific countries, these values
can vary. Please observe the article number on the type
plate of your machine. The trade names of the individual
machines may vary.
Noise/Vibration Information
Sound and vibration values were measured in accordance
with EN 62841-1.
¡Wear hearing protection!
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 62841-1.
Hammer drilling into concrete (handle)
Vibration emission value a = 13,7 m/s² h
Uncertainty K = 1,5 m/s²
Hammer drilling in concrete (additional handle)
Vibration emission value a
K uncertainty = 1,5 m/s
2
Drilling into metal (handle)
Vibration emission value a
Uncertainty K = 1,5 m/s²
Drilling in metal (additional handle)
Vibration emission value a
Imprecisión K = 1,5 m/s
2
Important!
El valor de las vibraciones cambia dependiendo del ámbito
de aplicación de la herramienta eléctrica, por lo que en
casos excepcionales puede superar al valor indicado.
= 10,910 m/s
2
h
= 4,503 m/s²
h
= 5,372 m/s
2
h
ENGLISH
20
20