Publicidad
3.
Remove the wall plate template
CAUTION:
Be sure the anchors are seated flush with the concrete surface.
4.
Install wall plate
using three (3) lag bolts
07
Installation Kit*). Tighten the lag bolts only until the washers are pulled firmly against the wall plate.
CAUTION:
Avoid potential personal injury or property damage! All three (3) lag bolts
movement of the wall plate
07
*
Contact Customer Service at 888-384-1115 to inquire about the Concrete Installation Kit CMK1.
3
C3
*
All manuals and user guides at all-guidesbox.com
and insert three (3) anchors
06
and three (3) washers
C1
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
(Fischer UX 10 x 60R - included in the Concrete Installation Kit*).
C3
(use only the lag bolts and washers from the Concrete
C2
MUST BE firmly tightened to prevent unwanted
C1
4
07
*
C2
C1
11
Publicidad
