Changing The Brightness Of The Indicators (Dimmer); Saving Power In Standby Mode - Sony HT-X9000F Manual De Instrucciones

Changing the Brightness
of the Indicators
(DIMMER)
You can change the brightness of the
indicators on the main unit.
1
Press DIMMER.
The display mode appears on the TV
screen.
2
Press the button repeatedly to
select the desired display mode.
Mode
[Bright]
[Dark]
[Off]
Note
All the indicators on the main unit are
turned off when [Off] is selected. They turn
on automatically when you press any
button, then turn off again if you do not
operate the system for about 10 seconds.
However, in some cases, the indicators
may not turn off. In this case, the
brightness of the indicators is same as
[Dark].
DIMMER
Explanation
All the indicators light
brightly.
All the indicators light
darkly.
All the indicators are
turned off.
Saving Power in Standby
Mode
Check that you have made the following
settings:
– [Bluetooth Standby] is set to [Off]
(page 47).
– [Standby Through] is set to [Off]
(page 47).
43
US