Publicidad
Idiomas disponibles
Idiomas disponibles
Programming the cooking duration
! All the cooking zones may be programmed
simultaneously, for a duration between 1 and 99 minutes.
1. Select the cooking zone using the corresponding
selector button.
2. Adjust the power level.
3. Press the
programming button. The indicator
light corresponding to the selected zone will start
flashing.
4. Set the cooking duration using the
buttons.
5. Confirm by pressing the
selection occurs after 10 seconds.
The timer begins counting down immediately. A buzzer
sounds for approximately 1 minute and the cooking zone
switches off when the set programme has finished.
Repeat the above procedure for each hotplate you wish to
programme.
Using multiple programmes and the display
If one or more hotplates are programmed, the display will
show the data for the hotplate with the least time remaining,
and the light corresponding to the position of the hotplate
will flash. The lights corresponding to the other hotplates
programmed will be switched on.
To visualise the time remaining for the other
programmed hotplates, press the
repeatedly: the time remaining for
each hotplate will be shown
sequentially in clockwise order,
starting from the front left hotplate.
Changing the programme
1. Press the
button repeatedly until the duration you
wish to change is shown.
- - - - -
+ + + + +
2. Use the
and
buttons to set the new duration.
3. Confirm by pressing the
To cancel a programme, follow the above instructions. At
- - - - -
step 2, press the
button: the duration decreases
progressively until it reaches 0 and switches off. The
programme resets and the display exits programming
mode.
- - - - -
+ + + + +
and
button or automatic
button
button.
Timer
The hob must be switched on.
The timer can be used to set a duration up to 99 minutes.
1. Press the
programming button until the timer
indicator light is illuminated
2. Set the desired duration using the
3. Confirm by pressing the
The timer begins counting down immediately. When the
time has elapsed, a buzzer will sound (for one minute).
Control panel lock
When the hob is switched on, it is possible to lock the oven
controls in order to avoid accidental changes being made
to the settings (by children, during cleaning, etc.). Press
the
button to lock the control panel: the indicator light
above the button will switch on.
To use any of the controls (e.g. to stop cooking), you must
switch off this function. Press the
moments, the indicator light will switch off and the lock
function will be removed.
Switching off the hob
Press the
button to switch the appliance off.
If the control panel lock has been activated, the controls will
continue to be locked even after the hob is switched on
again. In order to switch the hob on again, you must first
remove the lock function.
"Demo" mode
It is possible to set the hob to a demonstration mode where
all the controls work normally but the heating elements do
not switch on. To activate the "demo" mode the hob must
be switched on, with all the hotplates switched off.
+ + + + +
• Press and hold the
and
for 6 seconds. When the 6 seconds have elapsed, the
ON/OFF and CONTROLS LOCKED indicator lights will
flash for one second. Release the
and press the
button;
• The display will show the text DE and MO and the hob
will be switched off.
• When the hob is switched on again it will be set to the
"demo" mode.
To exit this mode, follow the procedure described above.
The display will show the text DE and OF and the hob will
be switched off. When it is next switched on, the hob will
function normally.
.
- - - - -
+ + + + +
and
buttons.
button.
button for a few
- - - - -
buttons simultaneously
+ + + + +
- - - - -
and
buttons
27
GB
Publicidad
