Descargar Imprimir esta página

Sony DR-BT50 Manual De Instrucciones página 7

Ocultar thumbs Ver también para DR-BT50:

Publicidad

Idiomas disponibles

Idiomas disponibles

Charging the unit
The unit contains a rechargeable Lithium-Ion battery, which should be
charged before using for the first time.
1
Connect the supplied
AC power adaptor to the
DC IN 3 V jack on the
unit.
Wireless Stereo
Headset
When the AC power adaptor is
connected to an AC outlet,
charging starts.
Tip
If the AC power adaptor is connected
to an AC outlet while the unit is
turned on, the unit will be turned off
automatically.
01US03GET-U2.p65
To an AC
outlet
RIGHT
AC power
To DC IN
adaptor
3 V jack
(supplied)
DR-BT50_CEK [US] 3-095-523-51(1) NEW CID
7
Black
2
Make sure that indicator
(red) lights up while
charging.
RIGHT
Charging is completed in about
3 hours* and the indicator (red)
goes off automatically.
* Time required for empty battery to
recharge.
Caution
If this unit detects a problem while
charging, the indicator (red) may
turn off, although charging is not
complete.
Check for the following causes:
– Ambient temperature exceeds the
range of 0 °C – 40 °C (32 °F –
104 °F).
– There is a problem with the
battery.
In this case, charge again within the
above-mentioned temperature range.
If the problem persists, consult your
nearest Sony dealer.
Continued
7
US
21/12/06, 3:49 pm

Publicidad

loading