Publicidad
①
①
14
①
②
②
②
③
English
When first servicing the cheekpads, it is suggested that you do only one at a time so
that the other can be used as a reinstallation guide.
To remove the cheekpads, first undo chinstrap.
Gently pull the cheek pad toward the front of the helmet, then pull the back of the
cheek pad inward to release and slide it off the strap.
To take off the fabric covering for washing, peel the covering off over the rear edge
of the cheekpad assembly until all the fabric is on the face side surface. Then draw
the covering through the opening by grasping the rectangular collar and pulling.
To wash fabric coverings, put them into lukewarm water with small amount of laundry
soap or your own shampoo and wash gently by hand. Rinse well with fresh water and
wipe off with a soft cloth. Dry them in the shade at ambient temperature.
WARNING :
Never use petrol, thinner, benzene or any other solvents.
To replace fabric covering, first ensure the cover is turned right side out with the
EMERGENCY tab drawn through the slot, making sure it is not twisted. Next, stretch
the cover over pad and adjust it to lie smoothly. Then push the rectangular collar
through the pad assembly, making sure it is not twisted, and adjust into final position.
Publicidad
