Descargar Imprimir esta página

Parkside PBSA 12 F5 Traduccion Del Manual De Instrucciones Originale página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107
Original accessories/auxiliary
equipment
Use only the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance.
Safety guidelines for battery
chargers
This appliance may be used by
children aged 8 years and above
and by persons with limited
physical, sensory or mental
capabilities or lack of experience
and knowledge, provided that
they are under supervision or
have been told how to use the
appliance safely and are aware
of the potential risks. Do not
allow children to use the appli-
ance as a toy. Cleaning and user
maintenance tasks may not be
carried out by children unless
they are supervised.
The charger is suitable for indoor use only.
WARNING!
To avoid potential risks, damaged mains cables
should be replaced by the manufacturer, their
customer service department or a similarly
qualified person.
ATTENTION!
This charger can only charge the follow-
ing batteries: PAPK 12 A1/PAPK 12 A2/
PAPK 12 A3/PAPK 12 B1/PAPK 12 B3/
PAPK 12 C1/PAPK 12 D1.
A current list of battery compatibility can
be found at www.lidl.de/akku.
6 
GB │ IE
Before use
Removing/charging/
inserting the battery pack
NOTE
The battery is partially charged. Ideally, fully
charge the battery before use. You can
charge the lithium-ion battery at any time
without shortening its service life. Interrupting
the charging process does not damage the
battery.
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should
be checked regularly. The optimum charge
level is between 50% and 80%. The storage
climate should be cool and dry and the
ambient temperature should be between
0°C and 50°C.
CAUTION!
Always unplug the appliance before you
remove the battery pack
the battery pack to the charger.
1) To remove the battery pack
release button
and pull the battery pack
out of the appliance.
2) Insert the battery pack
charger
.
3) Insert the power plug into the socket. The red
charge indicator LED
4) The green charge indicator LED
that the charging process is complete and the
battery pack
is ready for use.
5) Push the battery pack
ance.
from or connect
, press the
into the battery
lights up.
indicates
back into the appli-
PBSA 12 F5

Publicidad

loading