Mannesmann 92575 Instrucciones De Uso página 6

Compact Tool Kit
Art. no. 92575
Instruction Manual
This operating manual and the attached
safety guidelines must be read and
observed before using this machine!
Intended Usage
The Compact Tool Kit is to be used for
drilling, mortising, engraving, polishing,
grinding or cutting various materials in model
building and other hobby activities.
Additional Safety Guidelines for Compact
Drills
While working, keep your hands away
1.
from the attachment tool.
Exercise care when working with
2.
irregularly shaped materials. Secure such
materials to prevent slippage.
Particularly when cutting and drilling, be
3.
sure that the tool does not become
jammed and jolt out of your hands.
Always direct the power cord and/or
4.
extension cord away from the machine
and do not let it come into contact with the
tool attachment.
Keep the machine free of oil and grease
5.
at all times.
Do not use the machine when you are
6.
tired or not concentrated.
Make sure that the attachments are kept
7.
in good condition. Damaged cutting and
grinding discs should never be used.
Before performing any work on the
8.
machine itself, make sure that the power
cord is disconnected from the power
supply.
9. Switch the machine off and wait for it to
come to a full stop before putting it down.
Always be aware of the machine's
10.
rotational direction. The machine is
always to be held such that sparks, dust
or shavings are discharged away from
you.
When grinding and cutting metal, sparks
11.
are to be expected. Be sure that the
sparks do not cause injury to yourself or
others.
Exercise care when holding or carrying
12.
the machine. The attachment tools are
sharp and can cause injury even when
the machine is not in operation.
Before changing the attachment tools or
13.
otherwise working on the machine itself,
the power cord should always be
unplugged.
Do not press the spindle lock button while
14.
the machine is in operation.
Do not use grinding discs with a diameter
15.
larger than 25 mm. Such discs can
shatter and cause serious injury due to
the machine's high operating speed.
Check the integrity of extension cords
16.
before they are used, and replace any
damaged cords.
Device Operation
Before operating the machine, take the time
to familiarize yourself with its operational
features and attachments. The machine
operates at a very high speed. It is a high-
performance, versatile and easily operated
device for grinding, cutting, drilling and
polishing a variety of materials. The machine
can be equipped with attachments available in
a wide variety of shapes and sizes.
The machine is equipped with a switch for
regulating the rotational speed and operates
with rotational speeds between 8,000 - 30,000
rpm.
The optimal rotational speed depends on the
material and the attachment and will be
explicated later in this operating manual.
GB - 7