Dentsply Maillefer propex-pixi Manual De Usuario página 43

Recommended separation distances between portable and mobile RF
communications equipment and the not life support equipment
The Product is intended for use in an electromagnetic environment in which radiated
RF disturbances are controlled. The customer or the user of the Product can help
prevent electromagnet interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the Product as
recommended below, according to the maximum output power of the communications
equipment.
Rated maximum
output power of
transmitter W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be estimated using the equation applicable to
the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the higher frequency range applies.
IFY-ISR / F1902128.ES / 11 / 2011 - updated 02/2016
Separation distance according to frequency of transmitter
150 kHz to 80
MHz
d = 0.35
0.04
0.11
0.35
1.1
3.5
Note
At 80 MHz and 800 MHz, the separation distance fort the
higher frequency range applies.
Note
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
m
80 MHz to 800
MHz
d = 0.35
0.04
0.11
0.35
1.1
3.5
800 MHz to 2.5
GHz
d = 0.7
0.07
0.22
0.7
2.2
7
43/44