Publicidad
Idiomas disponibles
Idiomas disponibles
If the wheel lift is less than vertical, the "GO" function is disabled until the
spindle is vertical.
To perform automated tasks, press and release the right side of the pedal.
This is referred to as the "GO" pedal.
A) Wheel Lift Down
Rotation Pedal
To rotate the spindle clockwise, press and hold down the rotation pedal.
Release when assembly is rotated to desired position.
To rotate the spindle counter clockwise, lift and hold the rotation pedal.
Release when assembly is rotated to desired position.
Keep hands clear of wheel, tire and rollers during rotation.
A) Rotation
C) Up for counter clockwise
Press Arms
The bead pushers assist with tire mounting. The pushers moves in tandem
with the mount / demount tool head.
A) Press Arm Roller
Tool Control Joysticks
To move the tools for operations such as setting rim diameter, manual
controls, etc., use the joystick that corresponds to the appropriate tool.
Keep hands clear of wheel, tire, rollers and other tools during
operation.
Image 12.
Maintenance
Maintenance
Maintenance Schedule
Maintenance Schedule
Do not hose down or power wash the tire changer.
Proper care and maintenance are necessary to ensure that the tire changer
operates properly. Proper care will also ensure that rims and tires are not
damaged during the mount/demount process.
Daily
• Turn the tire changer power off at the end of the work day. At a
minimum, depress the emergency stop switch
• Never leave a wheel assembly on the tire changer overnight. Always
remove all assemblies and ensure tools are returned to their home
position
• Check for worn or damaged rubber and nylon components that should
be replaced to prevent damage from occurring. Replace worn parts as
needed (rubber pads and blocks, rollers, and mount/demount head)
• Clean all areas that contact rims or tires to prevent possible scratching
to rim.
Weekly
• Clean the tire changer with shop towels or a vacuum cleaner. Do not
clean with or use compressed air, which can blast dirt between moving
parts.
• Do not use cleaning solvents to clean pressure regulator/oiler.
Annually
• Change hydraulic fluid and filter once per year. Contact your Hunter
Service Representative for this service.
Periodically
• Check for loose bolts and tighten per specifications. Contact your
Hunter Service Representative for information.
English
Image 9.
B) Wheel Lift UP / GO
Image 10.
B) Down for clockwise
Image 11.
B) Press Arm Shoe
End User License Agreement
End User License Agreement
Use of equipment and it's operating software is acknowledgment of
agreement to the terms of the End User Licensing Agreement ("EULA"). The
entire EULA can be found by scanning the QR Code below.
Environmental Information
Environmental Information
The following disposal procedure shall be exclusively applied to the machines
having the crossed-out bin symbol on their data plate.
Image 13.
This product may contain substances that can be hazardous to the
environment and to human health if it is not disposed of properly.
The following information is therefore provided to prevent the release of these
substances and to improve the use of natural resources.
Electrical and electronic equipment should never be disposed of in the usual
municipal waste but must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and on this page, reminds
the user that the product must be disposed of properly at the end of its life.
In this way it is possible to prevent that a non specific treatment of the
substances contained in these products, or their improper use, or improper
use of their parts may be hazardous to the environment or to human health.
Furthermore, this helps to recover, recycle and reuse many of the materials
contained in these products.
Electrical and electronic manufacturers and distributors set up proper
collection and treatment systems for these products for this purpose.
At the end of the product's working life, contact your supplier for information
about disposal procedures. When you purchase this product, your supplier will
also inform you that you may return another worn-out appliance to him free of
charge, provided it is of the same type and has provided the same functions
as the product just purchased.
Any disposal of the product performed in a different way from that described
above will be liable to the penalties provided for by the national regulations in
force in the country where the product is disposed of.
Further measures for environmental protection are recommended: recycling
of the internal and external packaging of the product and proper disposal of
used batteries (only if contained in the product).
Your help is crucial in reducing the amount of natural resources used for
manufacturing electrical and electronic equipment, minimise the use of
landfills for product disposal and improve the quality of life, preventing
potentially hazardous substances from being released in the environment.
9
Publicidad
