Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL FIREPLACE ASSEMBLY INSTRUCTIONS
7. Insert shelf pins (EE) at desired height, ensuring they
are level. Place shelf (I) on top of shelf pins (EE).
Repeat for remaining shelf (I).
Hardware Used
EE
Shelf Pin
10180SB-28-254 7#
8. Place door pull (HH) into predrilled hole on right door,
Securing with two door pull screws.
Repeat for remaining door pull (HH).
1052IM-28-208 11#
Hardware Used
Door Pull
HH
9. Hold the door (K) and align with the inside of the
side wall of the main body. Align and slide the
hooks/catches on the hinge body attached to
door (K) into the recesses in the hinge mounting
plates attached to the inside wall of the main body.
Then press on the back part of the hinge body until
it clicks into place, Repeat for other hinges.
To remove press the square button at the back
of the hinge body to release the hinge from the
mounting bracket. Unlock both hinges and pull
the door away from the fireplace body.
1035IM-28-225 7#
7
x 8
8
x 2
9
1
7
(CONT'D)
I
K
J
J
I
EE
HH
1
K
Publicidad
