Publicidad
Idiomas disponibles
Idiomas disponibles
DO7273S
PARTS
1. Floor nozzle
2. Button to pull out or retract brushes
3. Slide button to set length of tube
4. Telescopic tube
5. Hose
6. Connection for hose
7. Handle
8. Handle lid dust bag compartment
4
3
2
1
ASSEMBLY
Always unplug the vacuum cleaner before (dis)assembling any parts.
Hose
Assembly: Put the hose into the hose connection in the vacuum
cleaner. Push the hose in until it clicks into place.
Disassembly: Unplug the vacuum cleaner. Push the ribbed release
buttons to pull the hose out of the hose connection.
Telescopic tube
1. Put the handle of the hose into the telescopic tube.
2. Set the telescopic tube to the desired length. To do this, push the slide button
forward and pull out the bottom part of the tube to make it longer. Release the
slide button and let the tube snap into place.
3. Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the
nozzle.
5
6
11
10
7
8
9
9.
Storage space for 2 accessories
10. Full dust bag indicator
11. Button for automatic cord rewinding
12. Button to set the suction power
13. On/off button
14. HEPA filter underneath grid
15. Dust bag: 4 l
16. Dust bag frame
13
12
36
14
15
16
Publicidad
