Descargar Imprimir esta página

Jata calor TC73 Instrucciones De Uso página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4
•  Do not dampen it nor immerse in water.
•  Do not place under or in front of any plug.
•  Don't allow children play with the appliance. Keep the appliance 
out of the reach of children.
•  To unplug, pull from the plug, never from the cable.
•  Do not place near the curtains, flammable items or products.
•  Allow at least one meter around the heater with the object of air 
can round with normality.
•  Always place the heater in vertical position and stand it on a firm 
solid horizontal base (not over carpets specially quilted carpets).
•  Do not fix the tip over switch. It is dangerous that the switch get 
fixed, because in case of the appliance falling it would not do its 
function.
•  Do not rest the cable on hot parts of the appliance and avoid to 
place it in the air output grid.
•  This appliance incorporates a safety device which will disconnect 
the resistance in case of overheating. Nevertheless to keep the 
appliance refrigerated the fan will not stop. 
•  The cleaning and maintenance done by users, can not be done by 
children without any supervision.
•  If the cable were to deteriorate it must be changed by an 
Authorised Service Centre.
INSTRUCTIONS OF USE
• Plug the appliance into the mains.
• Turn the power selector (1) to the desired position. The fan heater will start to work.
- Position * : The appliance will work as a fan and only give cold air.
- Position I : Minimum heating power.
- Position II : Maximum heating power.
- Position 0 : Off.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning ensure the appliance is unplugged.
• Allow to cool and clean with a soft dry cloth.
• It is important to keep the air intake and output grids clean of dust and fluff.
• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the surfaces of the
appliance.
01 manual jata TC73.indd 11
11
19/05/16 09:43

Publicidad

loading