Descargar Imprimir esta página

Imetec D1705 Instrucciones De Uso página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Use the appliance only with the supplied accessories that are an essential
part of the appliance.
DO NOT use extension cords or adaptors .
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Refer to Figure [A] in the Illustrative Guide to check the contents of the package.
1.
Rear air intake grid
2.
Technical data
3.
Swing button
Unpack the product.
Check that it is intact and not damaged.
Connect the product to the domestic mains.
WARNING! This appliance is not to be used if it has been dropped
or if there are visible signs of damage.
For fan operation, move the power switch (6) to the cool air position and adjust the ambient
thermostat (5) to the maximum temperature.
For gradual heating, move the power switch (6) to the Hot air position with ECO function and
adjust the ambient thermostat (5) to the required temperature.
For quick heating, move the power switch (6) to the rapid heating position and set the ambient
thermostat (5) on the required temperature.
To switch the appliance off, turn the power switch (6) to off.
Anti-freeze function
This function assures maintaining the room temperature at around +5°C. The fan heater turns on
SYMBOLS
Warning
Prohibited
Do not cover
Appliance OFF
Cool air
PREPARATION
Hot air with Eco function
Rapid heating
Anti-freeze
Max temperature
Note
4.
Motor casing and air outlet grid
5.
Ambient thermostat
6.
Power switch
USE
EN
11

Publicidad

loading