Filling With Water - Honeywell CO25MM Manual Del Usuario

FILLING WITH WATER ( Continuous Water Supply Connection)
• Connect a garden hose connector to the water inlet valve,
Make sure garden hose connector is well screwed with water
inlet valve.
• Connect water supply to the garden hose, and turn on water
supply.
• Water inside the tank will automatically refill once, it reaches
the Min. Level.
• Similarly, the water supply to the tank will stop, once the tank
is full, and reaches Max. Level.
WARNING
• Maximum water inlet pressure 0.5 MPa.
FILLING WITH WATER (Manual Operation)
• Water tank can be refilled by using water inlet hole on the top
of unit.
USE & OPERATION
Water inlet valve
11