Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
DANGER: for any kind of maintenance, disconnect the power supply.
The gear motor is supplied with permanent lubrication grease and therefore does
not require maintenance.
Cables, springs, and supports do not require periodic maintenance.
In the event of malfunction, the system must not be used. Contact specialized
personnel.
GENERAL WARNINGS
Attach labels that warn against crushing in a highly visible place or near the fixed controls;
Permanently attach the labels concerning manual release and place them near the manoeuvre device;
Markings must be visible even after the device has been installed. If markings are hidden after
installation, this must be indicated in the instructions.
The movement motors must be provided with a label that instructs to keep children away from the
moving door, or place the appropriate symbol (ISO 3864, see symbol)
FINAL RECOMMENDATIONS
Keep the remote control out of the reach of children and do not let them play with the control devices.
Provide the system with safety devices such as: photocells and a sensor rib.
Realize the system in compliance with current standards.
It is absolutely necessary for the door to be provided with check stops prior to installation of the
reduction gear.
All maintenance, repair and adjustment must be carried out by qualified personnel.
Motors with pressure-sensitive systems must be equipped with a label that says ATTENTION: RISK
OF CRUSHING.
DISPOSAL
Dispose of materials in compliance with current standards.
21
GB
Publicidad
