Philips OneBlade Pro QP6620 Manual página 17

1 Hold the skin guard on both sides and press
2 Switch the appliance on.
3 Place the skin guard onto the skin and stretch
4 Switch off and clean the appliance after each
5 To remove the skin guard, put one finger under
2
1
Shaving without skin guard
The body blade without the skin guard allows you
to shave hair on your body below the neckline (for
example the chest) with a smooth result.
1 To remove the skin guard, put one finger under
2
1
2 Switch the appliance on.
onto the blade.
the skin with your free hand. Move the
appliance upwards slowly, against the grain.
- When using the appliance on your armpits,
raise your arm and put your hand on the
back of your head to stretch the skin.
- Regularly remove cut hair from the guard. If a
lot of hair has accumulated in the guard,
remove it from the appliance and blow
and/or shake out the hairs.
use.
the edge of the guard and press on the blade
with your thumb.
the edge of the guard and press with your
thumb on the blade.
17
English