Philips OneBlade Pro QP6620 Manual página 26

26
English
Problem
The appliance
does not work
anymore.
The appliance
does not cut hairs
anymore.
Possible cause
The rechargeable
battery is empty.
The blade is
blocked by dirt.
Travel lock is
activated.
The blade is placed
on the handle
incorrectly.
The blade is
damaged or worn.
Solution
Charge the appliance (see
chapter 'Charging'). During
charging, the battery
charge indicator flashes
white. If the battery charge
indicator does not flash,
check whether there is a
power failure or if the wall
socket is live. If there is no
power failure and the wall
socket is live but the
battery charge indicator
still does not flash, take the
appliance to your dealer or
a Philips service center.
Switch on the appliance
and rinse the blade under
the tap with warm water.
Hold the blade in a cup
with warm water (60°C and
not hotter) for approx. 30
seconds.
Press the on/off button for
3 seconds to deactivate
travel lock.While you
deactivate the travel lock,
the display counts down.
Then the travel lock
symbol lights up and
switches off.The appliance
is now ready for use again.
Push the blade onto the
appliance until you hear a
click.
Replace the blade with a
new one. See chapter
'Replacement'.