Publicidad
Depth
Control Rod
SDS
Chuck
360°
Auxiliary
Handle
Dust
Guard
1/2" Standard chuck
with SDS adapter
Auxiliary Handle and Depth
Control Rod Assembly
1. Turn the auxiliary handle in a clockwise direction
while is released so that the mount opening can
pass freely on top of the chuck.
2. Insert the hammer drill through the auxiliary
handle mount.
3. Press the lock (A) to insert the depth control rod
in the hexagonal mount orifice.
4. Rotate the auxiliary handle together with the
mount until set into the adequate position to
operate the tool.
5. Turn the auxiliary handle to fix the mount firmly
to the hammer drill head.
6
ENGLISH
Function
Selector Block
Reversible
Button
mode
Function
lever
Selector
Chuck
Key
Preparation
Steps 1 & 2
Mount
Auxiliary
Handle
Parts
Variable
speed
control
Switch
Carbon brushes
wear indicator
Power Cord
4
5
Non-Slip
Handle
Continuous Use
Button
Energy
LED indicator
Cord
Protector
Depth
Control Rod
3
A
Publicidad
