BaByliss 9004U Manual De Usuario página 7

HOW TO USE YOUR BABYLISS 9000
READ THE SAFETY INSTRUCTIONS FIRST.
HOW TO USE
Warning: Hot surface! When in
use, the appliance must never come
into contact with the scalp, face,
ears and neck.
CHARGING YOUR BABYLISS
9000 CORDLESS WAVER
First select the correct
adaptor pins for your
mains outlet.
Plug in to the mains.
This BaByliss 9000 cordless waver is very
easy to use but before you do anything
you must take your time to charge it for
3 hours before the first use. A 3 hour
charge will give you approximately 40
minutes use and charging your styler
for 5 hours will give you a full battery
charge.
Fix to the adaptor.
Press on the lock
to release.
Please note your styler will not function
while charging.
Whilst your styler is charging,
the LED charging light will flash slowly
and continuously with the colour
indicating the level of battery charge.
Flashing red
= below 30% battery charge
Flashing yellow
= 30% - 69% battery charge
Flashing green
= 70% - 94% battery charge
Solid green
= 95% - 100% battery charge
WARNING: If the charging light
suddenly starts to flash rapidly then
the appliance is faulty. If this happens,
please stop charging and remove the
adaptor from the mains and contact our
Customer Care Centre for further advice.