HOW TO USE YOUR BABYLISS 9000
INSTRUCTIONS FOR USE
Please make sure
Whilst still
you touch and
touching the rose
hold the rose
gold panel with
gold panel.
one hand, use
your other hand
to press and hold
the on button for
2 seconds.
• Once the styler is switched on it will
automatically start heating up to160°C.
• There are 3 temperature settings 160°C,
170°C and 180°C which are indicated by
the LEDs as shown below.
• To select the temperature setting press
the on/off button once, twice or three
times.
• The LEDs will flash when your styler is
heating up and will stop flashing once the
target temperature is reached and it is
ready to use
• If you have delicate, fine, bleached or
coloured hair, use the lower heat setting.
For thicker hair, use the higher heat
The gentle sound
notification
indicates your
styler is switched
on.
Temperature select
o
High (180
C)
o
Medium (170
C)
o
Low (160
C)
Default temperature : 160
setting. We suggest when using for the
first time you test the heat settings
to ensure you've got the correct
temperature for your hair type. Start
on the lowest setting and increase the
temperature as necessary.
• Ensure your hair is dry and combed
through.
• Divide hair into sections.
• Please note: Before styling make sure the
universal heat glove is worn on the hand
which is guiding the hair between the
barrels.
• Take a section of hair and clamp the
hair between the barrels by pressing the
appliance together.
• Hold in place for 5-8 seconds. Take care
to avoid the hot surfaces of the appliance
coming into contact with the skin, in
particular the eyes, ears, face and neck.
• Release the appliance from the hair and
gently slide down to the next section. Re-
position the appliance to overlap the last
wave created, to ensure a continuous wave
effect in the hair.
• Continue this action down the entire hair
section, towards the ends of the hair.
o
C
• Allow hair to cool before combing
through.
• To switch off your styler please press and
hold the on/off button for 2 seconds.
The gentle notification sound indicates
the styler has switched off.
• Allow to cool before storing away.